PE FOAM
Polycell's range of closed cell
non-crosslinked PE Foam products are produced using low density
Polyethylene
resins with HCFC & CFC free gasses. Along with being a lightweight
material, PE Foam is also non-abrasive and chemically inert, water
resistant and environmentally 100%
recyclable.
PE Foam's soft texture makes it the ideal
packaging solution for highly polished surfaces as well as providing cushioning
against shock for fragile items. PE Foam comes in a variety of thickness
giving customers a greater choice for their packaging requirements as the
following table indicates.
|
Standard Roll
WIDTH
|
Standard Roll
THICKNESS
|
Standard Roll
LENGTH
|
|
1.2m
|
0.5mm
|
500m
|
|
1.2m & 1.5m
|
1mm
|
100m, 300m, 500m
|
|
1.2m & 1.5m
|
2mm
|
100m, 150m, 250m
|
|
1.2m
|
4mm
|
100m
|
|
1.2m
|
6mm
|
70m
|
|
1.2m
|
8mm
|
50m
|
|
1.2m
|
10mm
|
45m
|
|
1.2m
|
12mm
|
40m
|
PE Foam is able to be slit and perforated
to individual custom requirements and converted into bags and sheets.
CUSTOM PRINTED ROLLS
With our in-house printing facility we are
able to offer medium to high volume users of PE Foam the option of custom
printing.
PE FOAM PLANK
PE Foam planks are made up of
thermolaminated layers and produced by non-polluting processes with out
the use
of flurocarbons. Outside the above thicknesses, PE Foam Plank is
produced in sheet form and available in thicknesses from 15mm up to
50mm. Standard sheet sizes measure 1.1m (wide) x
1.8m (length) however can be produced in longer lengths if
required.
Die cut & custom fabrication enables customers specialized packaging solutions for their
expensive uniformed sized products through a stamping and gluing process.
PE FOAM NETTING
PE Foam fruit netting is ideally suited
for protecting produce from shock during
transit cycles and ensures scuff free protection with its non abrasive
properties.
Available in the following lengths and pack
sizes:
|
Opening
|
Length
|
QTY per Pack
|
|
80mm
|
80mm
|
4000
|
|
80mm
|
100mm
|
3200
|
|
80mm
|
120mm
|
2700
|
|
80mm
|
160mm
|
2200
|
|
80mm
|
180mm
|
2100
|
|
80mm
|
200mm
|
2000
|
|
80mm
|
30m continuous roll
|
|
SPECIALTY LAMINATED ROLLS
Through laminating processes, PE Foam can
be laminated with a variety of materials.
LDPE backed
foam greatly increases moisture barrier properties in underlayment for floating
floors.
* refer underlay category
HDPE backed
foam increases tear & puncture resistance and enhances sealing
characteristics for bags.
FOIL backed
foam in either aluminum or metalized poly further increasing insulating
features.
ADHESIVE backed foam comes in 2mm thick and is laminated with a low tack adhesive film.
PIPE LAGGING
Used as insulating material around pipes
for the plumbing industry.
Available in 5mm & 10mm thicknesses.
BACKER ROD + HOSE
